Fixings

Plated with green ruspert to withstand over 1,000 (min) hours salt spray resistance.
Partially Threaded
25ø sharp point for easy penetration into all wood types
40ø deep single thread to provide a secure fixing with high pull-out resistance.
Double countersunk and ribbed under the head to assist self-countersinking.
Serrated threads on 45% of the screw and two flutes to achieve optimum insertion into all wood types.
Square drive to reduce driver wear and prevent 'camming out'.
Full batch-traceability to the original steel mill certificate.

Timco Solo Chipboard Screws
25 Degree sharp point for easy penetration into wood and chipboard
Surface hardened up to 750HV to prevent torque shearing under load and a core hardness of up to 450HV for improved ductility
Plated in zinc 3 microns and yellow passivated
Made from C10-18 steel
Batch traceability
40 degree single thread to provide a secure fixing with high pull-out resistance
Lubricated to enhance screw insertion time,extra driving torque and resistance to corrosion.
Ideal for softwood, chipboard,PVCu,certain hardwoods.
Waxed

Timco Double Countersunk Woodscrews Stainless Steel
25 Degree Sharp point for easy penetration into wood/chipboard/MDF, plastics and thin sheet metal
Surface hardened upto 750 HV to prevent torque shearing under load and a core hardness of upto 450 HV for improved ducility.
Plated in zinc 5-8 microns to give high corrosion resistance
Made from C10-22 Steel to ensure consitent quality
Double countersunk reduces the likelihood of head shear and assits copletion of countersinking
40 degree deep single thread to provide a secure fixing with high pullout esistance
For use in Hardwood, Softwood, Chipboard, MDF, PVCu, Thin sheet metal

Twin Thread Drywall Screws
25 Degree Super sharp (ss) point for ease of penetration
60 Degree twin thread
Surface hardened up to 750HV to prevent torque shearing under load and a core hardness of upto 450 HV for improved ductility
Made from C10-18 steel
Cosmetically plated in black phosphate
Designed to pierce and drill into 0.9mm of metal channel
for larger gauge channel self drilling screws are recommended

TIMco Classic Zinc Multi-Purpose Screws
Features.
25 Degree sharp point for easy penetration into wood/chipboard/MDF,
plastics and thin sheet metal.
Surface hardened upto 750HV to prevent torque shearing under load and a core hardness of upto 450HV fo improved ductility
Plated in zinc 5-8 microns to give high corrosion resistance
Made from C10-22 Steel to ensure consistent quality
Double countersunk reduces the liklihood of head shear and assists completion of countersinking
40 degree deep single thread to provide a secure fixing with high pull out resistance
Lubricated with Gleitmo 605 to enhance screw insertion time and a greater resistance to corrosion (Gleitmo 605 is non-toxic and enviromentally friendly)
Full batch traceability to the original steel mill certificate
Fully threaded upto 70mm therafter partially threaded